Customising your handset
General points
You can customise the settings of your
e
820 handset,
using a menu which is shown on the handset’s display.
Please note that:
■
If you don’t press any button for about 25 seconds,
the handset will
time out
and the display will return
to standby mode.
■
When you confirm any setting you have made, you’ll
hear a
confirmation tone
. If you make a mistake,
you’ll hear a
warning tone
.
■
At the end of each set of steps
, you can return the
handset to standby mode by either:
—
replacing the handset on the base unit
—
pressing and holding the
HANG UP/C
button
Auto-answer
When a call comes in, you need to press any button to
answer it. Or you can set auto-answer — so, if the
handset is in place on the base unit, you simply lift it to
answer the call, without pressing any button.
1
Press the
PROG
button then
1 5
2
Use the
or
button to set:
0
for auto-answer
off
1
for auto-answer
on
3
Press the
PHONE/OK
button to confirm
35
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:21
Color profile: Generic CMYK printer profile
Composite Default screen
All manuals and user guides at all-guides.com
