Remote operation
To set a
remote
security code
This is the three-digit code you need if you dial
home to check your messages. Unless you set a
different code (any three digits), it is
321
.
1
Press and
hold
the
CODE
button (on the
underside of the base unit) for about 2 seconds
until the machine says
‘Set security code’
.
Then release the button
2
Press the
FORWARD
(MEMO) or
REWIND
(OGM) button to set the first digit
3
Press the
CODE
button again
4
Repeat steps 2 and 3 to set the second and
third digits
To check your remote security code
◗
Briefly press the
CODE
button
To check your
messages
remotely
1
Using a tone dialling phone, dial your home number
2
When you hear your outgoing message, press
u
You hear
‘Security code’
then a ‘beep.
3
Key in your remote security code
u
You hear one long ‘beep’.
4
Press
to play back your messages
and/or use the keys listed overleaf
Notes
◆
At steps 2, 3 and 4, you must press a key within
10 seconds, or the machine will cut off your call.
◆
At step 3, if you key in the wrong code, you can try
again. You have up to three attempts to get the code
right before the machine cuts off your call.
◆
After about 2½ minutes playback, the machine will
pause and you’ll hear a tone (short ‘beeps’).
To
continue playback, press any key within 10 seconds
.
If you don’t press a key, your call will be cut off.
33
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:21
Color profile: Generic CMYK printer profile
Composite Default screen
All manuals and user guides at all-guides.com
all-guides.com
