Read these notes first
Choosing a site
for the base
unit and
charger pod
The base unit and charger pod should each be placed
on a level surface, in a position where:
■
the mains adapter plug will reach an easily accessible
230-V
AC
switched mains supply socket —
never try
to lengthen the mains power cable
■
the base unit’s telephone cable will reach your tele-
phone line socket or extension socket (the charger
pod does not have a telephone line connection)
■
it is not close to
another telephone
— this can cause
radio interference
■
it is not close to a
sink, bath or shower
, or anywhere
else where it might get
wet
■
it is not close to other
electrical equipment
—
fridges, washing machines, microwave ovens, fluor-
escent lights, TVs etc.
The charger pod can be
wall mounted
if you prefer,
using the template supplied.
Radio signals
between
handset and
base unit
To use your handset and base unit together, you must
be able to establish a radio link between them. Be
aware that:
■
Any
large metal object
— like a refrigerator, a mirror
or a filing cabinet — between the handset and the
base unit may block the radio signal.
■
Other
solid structures
, like walls, may reduce the
signal strength.
Connection
and conditions
for use
You can connect your S2300 to a direct exchange line
(DEL) — a line connected to a local exchange, with its
own phone number; to an extension socket connected
to a DEL; or to an extension on an approved compatible
PBX. Do not connect the S2300 as an extension to a
payphone.
4
The
ringer equivalence numbers (RENs)
of all
instruments (phones, fax machines, etc.) connected to
an exchange line
must not add up to more than 4
—
otherwise, one or more of them may not ring and/or
answer calls correctly. The S2300 has a REN of 1, and
most other telephones have a REN of 1 unless marked
otherwise.
Mains power
connection
IMPORTANT
— the S2300 base unit and charger pod
must be used with the mains adapters supplied.
Using any other adapter will result in non-compliance
with EN60950, and will invalidate any approval given to
this apparatus.
Electrical
safety
◆
DON’T
let the base unit or charger pod get wet.
Electrical equipment can cause serious injury if used
while you are wet or standing in water.
◆
If the base unit (or the charger pod) ever falls into
water,
DON’T
retrieve it until you have unplugged the
power lead from the mains and the telephone line plug
from the telephone socket; then pull it out by the
unplugged cables.
◆
NEVER
use your S2300 outdoors during a thunderstorm
— unplug the base unit from the telephone line and the
mains socket when there are storms in your area. Damage
caused by lightning is not covered by the guarantee.
Read these notes first
E:\Binatone2003\S_2300\s2300_UK_draft02.vp
27 November 2003 19:49:53
Color profile: Generic CMYK printer profile
Composite Default screen
Binatone Help Line:
01325 304 473
5
