Installation and set-up
6
DC 9V
TEL LINE
1
3
5
4
Choose a suitable site for the
base unit See page 3
Plug the mains adapter into a
230 V AC, 50 Hz mains socket,
with the switch on the socket
set to OFF
Plug the mains adapter into a 230 V AC,
50 Hz mains socket, with the switch on
the socket set to OFF
Switch on at the mains socket(s)
If you have one or more charger pods …
Connect the mains power
lead and the telephone line
cord into the the base unit
2
Use the telephone
line cord supplied
with your S2300
— do not use any
other telephone
line cord
See the note
on page 4
See the note
on page 4
Installation and set-up
Fit a battery pack in each handset
6
7
Charge the batteries for 15 hours
When you don’t need to use the
handset (for example, overnight or
when you go out), replace it on
the base unit or charger pod, to
keep the batteries charged.
Before you use the handset for the first
time, it is important to charge the
batteries fully.
Leave the handset on the charging cradle
for 15 hours.
C
. Slide the battery
compartment cover into
place, pressing firmly to
Take care when
inserting the tab
into the slot.
A
. Remove the battery
compartment cover
B
. Insert the battery
pack as shown, and
tuck in the wires
BLACK
RED
The CHARGE light
comes on
The display may show
for a few
moments, and the antenna
symbol may flash.
searching
E:\Binatone2003\S_2300\s2300_UK_draft02.vp
27 November 2003 19:49:58
Color profile: Generic CMYK printer profile
Composite Default screen
Binatone Help Line:
01325 304 473
7
