To remove
(de-register)
all handsets
You may need to do this if you’re having
problems and you want to reset the system or
re-arrange handset numbers. You’ll then need
to re-register all handsets.
1
Disconnect the mains power lead from the
base unit and wait for a few moments
2
Reconnect the mains power lead
3
Press and hold the HANDSET LOCATOR
button until you hear a confirmation ‘beep’
4
Re-register all your handsets as described on
page 33
Registering new handsets
34
Troubleshooting
!
The S2300 must be serviced by trained engineers.
NEVER attempt any repairs or adjustments yourself
— you could make the problem worse and invalidate
the Guarantee.
ALWAYS
check first
that:
◆
you have followed the steps listed on pages 6 to 8 to
install and set up your S2300
◆
all connectors are firmly inserted in their sockets
◆
mains power is switched on at the socket
◆
the handset’s batteries are correctly and securely
installed, and are not run down
Everyday use
“I cannot make
or answer calls.”
Check that the base unit’s
mains power
adapter is
plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you’re using the
telephone line cable
that
was supplied with your S2300. Other telephone line
cables might not work.
Move the handset closer
to the base unit.
Check the
Battery Level
symbol on the display. If it is
low, replace the handset on the base unit or charger
pod to recharge the batteries.
Switch off power at the mains socket, wait for a few
seconds and then switch back on. This may solve the
problem.
E:\Binatone2003\S_2300\s2300_UK_draft02.vp
27 November 2003 19:50:06
Color profile: Generic CMYK printer profile
Composite Default screen
Binatone Help Line:
01325 304 473
35
