Using the base unit’s speakerphone
You can use the base unit as a speakerphone.
While you’re connected on a speakerphone call, the
SPEAKERPHONE light on the base unit is on.
!
Speakerphone calls using the base unit are ‘one way
at a time’ — while the other person is talking, s/he
can’t hear you. So try not to interrupt each other.
To make a
call
1
Press the
SPEAKERPHONE
button on the
base unit to get Dial tone
2
Key in the phone number on the base unit’s
keypad
Or press the base unit’s
Last Number
Redial
button to make a repeat call to the
last number you dialled on the base unit
To answer a
call
When the phone rings, to answer it using the
base unit’s speakerphone:
◗
Press the
SPEAKERPHONE
button on the
base unit
To end a
speakerphone
call
If you’re talking through the base unit’s
speakerphone, to end the call:
◗
Press the
SPEAKERPHONE
button on the
base unit
To adjust the
volume
To adjust the volume of the loudspeaker:
◗
Press the
VOLUME –
or
+
buttons on the
base unit
There are four volume levels altogether.
16
To transfer a
speakerphone
call to the
handset
If you’ve answered a call using the base unit’s
speakerphone, you can switch it over to the
handset for a private conversation, as follows:
1
Press the
HANDSET LOCATOR
button on
the base unit
The call is put on hold and the IN USE/CHARGE
light flashes. (Note: the handset does not ring
at this point.)
2
Press the
PHONE
button on the handset to
pick up the call
Using the base unit’s speakerphone
E:\Binatone2003\S_2300\s2300_UK_draft02.vp
27 November 2003 19:50:00
Color profile: Generic CMYK printer profile
Composite Default screen
Binatone Help Line:
01325 304 473
17
