19
5. Cleaning and Maintenance
5.1 Cleaning Procedures and Products Used
Your equipment was built with first-line materials, so use it properly and you will obtain great
satisfaction. Always keep your equipment clean and well-cared for, which will make it much more
durable.
Daily cleaning of the equipment must be carried out for good operation and durability.
Preventing the accumulation of bacteria which can cause contamination in food.
If your equipment is supplied with a protective film on the stainless steel parts, it must be
removed before the first cleaning.
ATTENTION!
Before carrying out maintenance or cleaning, make sure that the on/off switch is in the “0”
(off) position, that the plug is disconnected from the mains, the gas valve of the cylinder is
closed and the inside of the rotisserie at room temperature.
Never clean the glass of the roaster while it is still warm, as they could break due to the
thermal shock.
ATTENTION!
Do not use water jet to clean the equipment.
IMPORTANT
This equipment is not intended to be immersed in water for cleaning.
Follow the instructions below to learn the parts that can be immersed and what special care
is taken with the other parts.
Removable parts (skewers and grease collector) must be removed from the equipment and
washed with soap and water or neutral detergent. Clean the corners well, eliminating process
residues.
Clean the inside and outside of the roaster as often as possible to prevent food residue from
drying and sticking to the parts. For cleaning, dilute the mild soap or detergent or ammonia-based
remover in warm water and apply with a soft cloth. With a cloth dampened with water, rinse and then
dry the parts with a soft, dry cloth.
To clean the infrared burner, use only a soft brush. Do not use water as the burner plate must
not be wet.
Never use abrasive products or sponges (soap, brushes or steel wool), solvents or substances
containing acids or chlorine to clean metal parts, as they can scratch or damage the surface of the
parts causing corrosion points. Do not spill water on the motor and electrical parts for cleaning,
otherwise, when turning it on, it may cause an electric shock or even burn the equipment.
Summary of Contents for METVISA AMG.130
Page 1: ...1 ...
Page 24: ...24 Exploded View Drawing ...