Billyoh Mia 19351, Assembly Instructions Manual

Page: 14 / 15

Tools
Step
40
Lay the first roll of felt ensuring the felt is folded over
the edge as shown above. Ensure a 70mm overhang
is maintained over both ends. Fix in place with felt
tacks at 100mm intervals.
Tools
Step
41
Continue to lay the felt onto the cabin’s roof,
following the same process listed in step 40, fix the
felt with felt tacks at 100mm intervals. Ensure an
overhang of 70mm is present on the front edge.
Tools
Step
42
Align the fascia’s with the roof and fix into place
using 30mm nails, making sure to nail through the
fascia into the log boards. Ensure the felt fold behind
the fascia board.
Tools
Step
43
Fold the front of the felt down and line up the facia
board, using 30mm nails, nail directly through the
facia board and into the purlins.
Tools
Step
44
To complete your log cabin, affix the door latch into
place as shown using 30mm screws. Ensure you affix
the door latch on the exterior of the cabin.
Tools
Step
45
Congratulations! You have completed the installation
of your log cabin. Please refer to page 3 of the
instructions for the required building maintenance for
the seasonal timber movement.