Billyoh Mia 19351, Assembly Instructions Manual

Page: 11 / 15

Tools
Step
24
Following the process completed in stage 22, repeat
again with the opposite side door frame. Ensure the
frame sits flush against the log board. Attach the
bottom for the door framing with 30mm nails.
Tools
Step
26
Place the barge boards along the top of the Side
walls, and fix with 30mm screws. Repeat this on the
other side as well.
Review the technical document for
measurements to cut the framing to size.
.
Tools
Step
27
To begin the door assembly, lay both sides of the
door on a surface. Once set, fix the door hinge in the
locations marked. Affix in place with 30mm screws.
Tools
Step
23
Once you have affixed the door frame on the side of
the opening, slide the upper frame into position as
shown. Once in position, from the inside of the cabin,
fix in place with 30mm screws.
Tools
Step
25
On the interior of the cabin place the closure trim against
the boarding and align with the roof as shown above. Once
in position, fix each trim into place with 30mm nails.
Review the technical document for measurements to cut
the framing to size.
Tools
Step
22
To affix the door frame into position, push the left door
frame up against the wall boards as shown. Before
fixing in place with 30mm screws, ensure the door
frame sits flat on the floor boards.