Billyoh Mia 19351, Assembly Instructions Manual

Page: 10 / 15

Tools
Step
17
Tools
Step
19
At this point silicone can be placed down the side of
the roof panels.
Note: Silicone not included.
Tools
Step
18
Continue adding the roof boards along the roof, fixing each
one into position using 30mm nails, making sure that each
board is interlocked. The last board on each will overhang,
measure the length needed to be flush with the purlin.
Remove the board, cut and place back to fix.
Tools
Step
16
Lay the purlins into the slots on the front and rear of the
building, Screw these in place using 50mm screws by
screwing through the board into the purlin on the front and
back.
Please see the technical document for your cabin’s
roof board length. Place the fist roof board onto the
purlin. Once in position, fix to each purlin using 30mm
nails.
Tools
Step
21
Silicone can now be added down the split between the
roofing panels to seal them.
Note: Silicone not included.
Tools
Step
20
Repeat steps 18 and 19 and build the other half of the roof
secure each board in place and cut the ends of the final
board flush before proceeding.