Billion Bipac 9800 VNX User Manual Download

Page: 40 / 84

4.2.4 Statistics



Ethernet

Interface:

This field displays the type of port

Transmit Frames:

This field displays the number of frames transmitted until the latest second.

Transmit Multicast Frames:

This field displays the number of multicast frames transmitted until the latest

second.

Transmit Total Bytes:

This field displays the number of bytes transmitted until the latest second.

Transmit Collision:

This is the number of collisions on this port.

Transmit Error Frames:

This field displays the number of error packets on this port.

Receive Frames:

This field displays the number of frames received until the latest second.

Receive Multicast Frames:

This field displays the number of multicast frames received until the latest second.

Receive Total Bytes:

This field displays the number of bytes received until the latest second.

Receive CRC Errors:

This field displays the number of error packets on this port.

Receive Under-size Frames:

This field displays the number of under-size frames received until the latest

second.

Refresh:

Press this button to refresh the statistics.

Summary of Contents for Bipac 9800 VNX





















































































Search results

Summary of Contents for Bipac 9800 VNX

Reviews:

Related manuals for Bipac 9800 VNX

Brands by name

Popular brands

Billion Bipac 9800 VNX, User Manual

Search results

Summary of Contents for Bipac 9800 VNX

Reviews:

Related manuals for Bipac 9800 VNX

Brands by name

Popular brands