manualshive.com logo in svg

Billion BiPAC 6900AX(L)-2400, User Manual

Share
Download
Billion BiPAC 6900AX(L)-2400 User Manual Download Page 81

 

76 

In group "test", P2 and PPP0.1 are grouped in one group, they have their only network , see 

LAN

. 

 

 

If you want to remove the group, check the box as the following and press

 Remove

.  

 

 

Note:

 If you like to automatically add LAN clients to a WAN Interface in the new group add the 

DHCP vendor ID string. 
            By configuring a DHCP vendor ID string any DHCP client request with the specified vendor 
ID (DHCP option 60) will be denied an IP address from the local DHCP server. 
            If  a  vendor  ID  is configured for a specific client device, please REBOOT the client device 
attached to the modem to allow it to obtain an appropriate IP address. 
            Each LAN interface can only be added into one group and one WAN interface can only be 
used in one group.

Summary of Contents for BiPAC 6900AX(L)-2400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands