Device Configuration /
Access Management
86
BiPAC 6300VNP User Manual
Access Control
Access Control Listing allows you to determine which services/protocols can access BiPAC 6300VNP
interface from which computers. It is a management tool aimed to allow IPs (set in secure IP address)
to access specified embedded applications (Web, etc, user can set) through some specified interface
(LAN, WAN or both). User can have an elaborate understanding in the examples below.
The maximum number of entries is 16.
Access Control:
Select whether to make Access Control function available.
Rule Index:
This is item number
Active:
Select to activate the rule.
Secure IP Address:
The default 0.0.0.0 allows any client to use this service to manage the BiPAC
6300VNP. Type an IP address range to restrict access to the client(s) without a matching IP address.
Application:
Choose a service that you want to all access to all the secure IP clients. The drop-down
menu lists all the common used applications.
Interface:
Select the access interface. Choices are
LAN
,
WAN
and
Both
.
By default, the “Access Control” has
two default rules
.
Default Rule 1:
(Index 1), a rule to allow only clients from LAN to have access to all embedded
applications (Web, FTP, etc). Under this situation, clients from WAN cannot access the router even
from Ping.
