Device Configuration /
Interface Setup
57
BiPAC 6300VNP User Manual
Wi-Fi Protected Setup (WPS) Example III:
PBC (Push Button Configuiration) Method:
1.Click the PBC radio button in the GUI then press Start WPS.
2. Launch the wireless client’s WPS Utility (e.g. Ralink Utility). Set the Config Mode as Enrollee. Then
press the WPS button and choose the correct AP (e.g. Billion_AP) from the WPS AP List section
before pressing the PBC button to run the scan.
3. When the PBC button is pushed, a wireless communication will be established between your router
and the PC. The client’s SSID and security setting will now be configured to match the SSID and
security setting of the router.
