Billion BIPAC-5100 User Manual Download Page 49

Page: 49 / 53

4.3.5.2 Diagnostic DSL Line

Reset ADSL Line:

Click this button to reinitialize the ADSL line. The large text box

above then displays the progress and results of this operation

ATM Status:

Click this button to view ATM status.

ATM Loopback Test:

Click this button to start the ATM loopback test. Make sure

you have configured at least one PVC with proper VPIs/VCIs before you begin this test.

The ATM loopback test is useful for troubleshooting problems with the DSLAM and

ATM network.

Upstream Noise Margin:

Click this button to display the upstream noise margin.

Downstream Noise Margin:

Click this button to display the downstream noise

margin.

4.3.6 Firmware

To upgrade the firmware of BIPAC-5100(W), you should download or copy the

firmware to your local environment first. Press the

“Browse…”

button to specify the

path of the firmware file. Then, click

“Upgrade”

to start upgrading. When the

procedure is completed, BIPAC-5100(W) will reset automatically to make the new

firmware work.

Summary of Contents for BIPAC-5100






















































Search results

Summary of Contents for BIPAC-5100

Reviews:

Related manuals for BIPAC-5100

Brands by name

Popular brands

Billion BIPAC-5100, User Manual

Search results

Summary of Contents for BIPAC-5100

Reviews:

Related manuals for BIPAC-5100

Brands by name

Popular brands