TCP/IP
IP Address:
Enter the IP address of ADSL Router in dotted decimal notation, for
example, 192.168.1.254 (factory default).
IP Subnet Mask:
Type the subnet mask assigned to you by your ISP (if given).
RIP Direction:
Select the RIP direction from None, Both, In Only and Out Only.
RIP Version:
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast:
IGMP
(Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a Multicast group - it is not used to carry user data. The
BIPAC-5100/5100W supports both IGMP version 1 (IGMP-v1) and IGMP-v2. Select
None to disable it
4.2.2 Wireless LAN
802.11b is only supported for the BIPAC-5100W
ESSID:
Enter the unique ID given to the Access Point (AP), which is already built-in
to the router’s wireless interface. To connect to this device, your wireless clients must
have the same ESSID as the device.
Hide ESSID:
Select
Yes
to hide the ESSID in so a station cannot obtain the ESSID
through passive scanning. Select
No
to make the ESSID visible so a station can obtain
21
