4.1 Wizard Setup
4.1.1 Wizard Setup
Mode:
Select Routing (default) if your ISP allows multiple computers to share an
Internet account. Otherwise select Bridge.
Encapsulation:
Select the encapsulation type your ISP uses from the
Encapsulation
drop-down list box. Choices vary depending on what you select in the
Mode
field.
If you select
Bridge
in the
Mode
field, select
RFC 1483
.
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or
PPPoE.
Multiplex:
Select the multiplexing method used by your ISP from the Multiplex
drop-down list box either VC-based or LLC-based.
Virtual Circuit
ID: VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier)
define a virtual circuit.
VPI
: Enter the VPI assigned to you. This field may already be configured.
VCI:
Enter the VCI assigned to you. This field may already be configured.
16
