Billion BIPAC-5100 User Manual Download

Page: 9 / 53

2.4The Rear Ports

＊

Only the BIPAC-5100W has a wireless interface and antenna. BIPAC-5100

router does NOT have an antenna or wireless interface.

Port

Meaning

Power
Switch

Power ON/OFF switch

PWR

Connect the supplied power adapter to this jack.

3 RESET

After the device is powered on, press it to reset the device or
restore to factory default settings.

0-3 seconds

: reset the device

6 seconds above

: restore to factory default settings (this is used

when you can not login to the router, e.g. forgot the password)

LAN

1X — 4X

(RJ-45
connector)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.

CONSOLE

Console port is used for technical support purpose only.

LINE

Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.

Summary of Contents for BIPAC-5100






















































Search results

Summary of Contents for BIPAC-5100

Reviews:

Related manuals for BIPAC-5100

Brands by name

Popular brands

Billion BIPAC-5100, User Manual

Search results

Summary of Contents for BIPAC-5100

Reviews:

Related manuals for BIPAC-5100

Brands by name

Popular brands