Bil-Jax 3632T, Operator'S Manual

Page: 26 / 58

BIL-JAX 3632T
BOOM LIFT TRANSPORT
LIFTING INSTRUCTIONS TRANSPORT INSTRUCTIONS
Refer to Figure 3-10.
Completely lower and retract boom.
Secure boom and platform travel latches.
Remove all loose materials from machine.
Retract all outriggers to fully stowed position.
Attach rigging only to the designated forklift
pockets (A).
Adjust rigging to keep the machine level and to
minimize the risk of damage to machine.
When using a forklift, use only the designated
forklift pockets. Follow all forklift operating
instructions as indicated by the forklift
manufacturer.
Only trained and authorized personnel should
attempt to lift the boom using a crane or forklift.
Refer to Figure 3-10.
Verify that truck or trailer is parked on a firm and
level surface.
Completely lower and retract boom.
Secure boom and platform travel latches.
Retract all outriggers to fully stowed position.
Load boom onto truck or trailer.
Chock the wheels (B) and apply parking brake.
Place a wooden block under the tongue, near
the trailer hitch (C).
Lower jack until trailer tongue rests on the
wooden block. Swing up and lock the jack (D) so
that the weight of the tongue now rests on the
wooden block.
Secure the boom lift to the trailer bed using
straps or chains. Use only the two attachment
points beneath the machine, adjacent to the
outriggers (E).
Adjust as necessary to prevent damage to
rigging or machine.
Figure 3-10. Lift and Transport Instruction
24