3 – OPERATION
15
The ground control station includes the following
controls and Indicators. Refer to Figure 3-1 for
control locations.
1. Key Switch
Turning the key switch to the
PLATFORM
(1
A
) icon
selects operation from the platform. Turning the key
switch to the
GROUND
(1
B
) icon selects operation
from the ground control panel. The center (power
off) position interrupts all electric and hydraulic
power operations except emergency lowering.
Removing the key protects against operation by
unauthorized persons. The key may be removed
with the key switch in any selected position.
2. Battery Condition Indicator
Indicator LEDs light up to indicate the level of charge
remaining in the batteries. A lighted green LED
indicates an adequate charge level. Lighted yellow
LEDs indicate the need for charging soon. A lighted
red LED warns that the battery charge level is low;
boom operations should be halted until the batteries
are recharged.
3-4. Engine Start and Choke (Hybrid Model only)
Start a cold engine by pressing the Engine
START
(3)
button while pressing and holding the
CHOKE
(4)
button. To start/restart a warm engine, press the
START
button only.
5. Display Panel
The DISPLAY PANEL is a lighted text window that
displays the present operating status or an existing
error condition when the key switch is on.
6. Emergency Stop Button
When pushed in, the emergency
STOP
button
disconnects electrical power to the ground and
platform control stations. The emergency
STOP
pushbutton should only be pressed to immediately
stop all boom motion. To resume control, pull out the
emergency
STOP
button.
7-8. Boom Extend/Retract Buttons
Pressing and holding a desired
SPEED
button and the
BOOM EXTEND
(7) button at the same time extends
the telescopic boom. Pressing and holding a desired
SPEED
button and the
BOOM RETRACT
(8) button at the
same time retracts the boom. Boom motion
continues until the buttons are released or until the
boom reaches a hard stop or a safe travel limit.
9-10. Boom Raise/Down Buttons
Pressing and holding a desired
SPEED
button and the
BOOM RAISE
(9) button at the same time will raise the
boom. Pressing a desired
SPEED
button and the
BOOM DOWN
(10) button at the same time will lower
the boom. Boom motion continues until the buttons
are released or until the boom reaches a hard stop
or a safe travel limit.
11-12. Boom Rotation Buttons
Pressing and holding a desired
SPEED
button and the
BOOM ROTATION
CLOCKWISE
(11) or
COUNTERCLOCK
-
WISE
(12) button at the same time enables the boom
to rotate in the direction selected. The boom will
rotate through 700 degrees until the buttons are
released or the stop is reached.
13-14. Platform Tilt Buttons
Press and hold any
SPEED
button and the desired
PLATFORM TILT
(13 and 14) button at the same time
to level the work platform (levels the platform only,
not the boom lift).
15. Speed Buttons
The
SPEED
buttons along the lower right side of the
control panel must be pressed and held while
selecting a boom function. Four speeds are
available to control the positioning of the boom lift.
16-20. Outrigger Controls
For automatic outrigger extension/retraction: Select
EXTEND
(16) or
RETRACT
(17) outrigger button and
the
AUTO LEVEL
(18) button at the same time. To
manually extend or retract the outriggers: Select
EXTEND
or
RETRACT
outrigger button and one of the
OUTRIGGER
buttons (19) at the same time. The
outrigger indicator LEDs light up when the outriggers
are properly deployed and the boom weight is on the
outriggers. Each of the outer outrigger LEDs
indicates load is on the outrigger footpad. Each of
the inner outrigger LEDs, when flashing, indicate
that side is low and needs to be further raised for
leveling. The Auto Level LED lights up and a buzzer
sounds when the boom is level.
Summary of Contents for 3632T
Page 1: ...OPERATOR S MANUAL T 134 98 B33 01 0089 3632T ...
Page 42: ...BIL JAX 3632T 40 ...
Page 46: ...BIL JAX 3632T 44 ...
