18
www.bikefriday.com
800-777-0258 • +1-541-687-0487
Install the Front Wheel
Make certain the wheel is
fully seated in the fork drop-
outs and securely close the
quick release lever, as illus-
trated in the quick release
section [page 15]. The quick
release levers (front and
rear) are to be placed on the
non-drive side of the bicycle.
Fig. 17 Insert quick release in wheel.
Connect the Front Brake
There are several possible configurations of front brakes. The
Haul-a-Day is available with disc, V-brake, or linear pull (front
only). Please read directions specific to the brake type that
appear on the following pages.
Disc Brakes
When inserting the front wheel into the fork, ensure the disc
rotor (on wheel) fits nicely into the slot on the caliper (installed
on fork). You will want to avoid the rotor getting hung up or
caught on some part of the caliper as you are installing the
wheel into the fork to prevent rotor damage.
Fig. 18 Disc brake rotor and slot.
Fig. 19 Disc rotor slips into slot.
Assembling your Haul-a-Day
