31
www.bikefriday.com
800-777-0258 • +1-541-687-0487
Adjusting Haul-a-Day: Headset
From the bottom, move the
washer onto the rod and
thread the nut onto the rod.
With a 10mm wrench (or
adjustable wrench) hold in
place the nut while tighten-
ing the bolt head with a hex
wrench, creating bearing pre-
load. It is helpful to evaluate
the headset adjustment with
the tool still in place.
Fully tighten the locking head-
set spacer. [Fig. 48]
Fig. 46 Headset Press Tool.
Remove the washer and nut
from the bottom of the tool.
[Fig. 46]
Slide the rest of the tool, from
the top, allowing the 1¼”
tubing to cover the portion
of exposed steerer tube. [Fig.
47]
Haul-a-Day Headset Press Tool (cont.)
Fig. 47Headset PressSetup.
Fig. 48 Headset Press Tighten.
Remove the tool, reassemble and test for bearing adjust-
ment. Repeat if necessary.
