6
HOW TO REPLACE MANIFOLD ASSEMBLY
WATER MOISTURE MAINTENANCE INSTRUCTIONS
1. Remove the old manifold assembly from the air
tank.
3. Attach the new manifold assembly to the air
tank.
3.1 Tightened the manifold assembly until the air
tank will not leak.
3.2 Test pressure with 5 lbs of pressure to check for
leaks before use.
3.3 If leaking is still occurring, drain tank and re-
tighten.
3.4 Test pressure again before use.
2. Wrap the Teflon Tape (or the thread locker)
around the threads of the new manifold assembly,
before re-installing.
4. Repair is now complete.
WARNING
Accumulated moisture must be drained from tank frequently after use to prevent rusting. Failure to
do so will weaken the tank and may result in injury or property damage due to tank bursting or rupture.
Draining Instructions:
1. Drain tank outdoors.
2. Remove hose.
3. Fill tank with 5 psi -10 psi of air.
4. Hold tank upside down with manifold at lowest point. Make sure air outlet (Filler valve) is pointed away
from any people, vehicles, and any items that may be at risk with spraying inner tank fluid out.
5. Fully open air shut-off valve.
6. Allow all air and moisture to fully drain.
7. Close shut-off valve and reconnect hose. Use PTFE thread seal tape on threaded connection.
