background image

10

  TORIN ONE YEAR LIMITED WARRANTY

Torin Inc.® has been producing quality automotive repair and maintenance products since 1968. All products

sold are felt to be of the highest quality and are covered by the following warranty:

With proof of purchase for a period of one year from the date of that purchase, the manufacturer will repair or

replace, at its discretion, without charge, any of its products or parts thereof which fail due to a defect in

material or workmanship. This warranty does not cover damage or defects caused by improper use, careless

use or abuse of the equipment. This warranty does not cover parts normally considered to wear out or be

consumed in the normal operation of the equipment. Except where such limitations and exclusions are

specifically prohibited by applicable law, (1) the CONSUMERS SOLE AND EXCLUSIVE REMEDY SHALL BE

THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED

ABOVE, and (2) THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR

INCIDENTAL DAMAGE OR LOSS WHATSOEVER, and (3) THE DURATION OF ANY AND ALL

EXPRESSED AND IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF ONE

YEAR FROM DATE OF PURCHASE. Product alteration in any manner by anyone other than us, with the sole

exception of alterations made pursuant to product instructions and in a workman like manner. You

acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in

the product instructions is at Your own risk.

Always check for damaged or worn out parts before using any product. Broken parts will affect the equipment

operation. Replace or repair damaged or worn parts immediately. Do not modify the product in any way.

Unauthorized modification may impair the function and/or safety and could affect the life of the equipment.

There are specific applications for which products are designed and tested during production. Manufacturer

provided warranted items are not authorized to be repaired by anyone other than the manufacturer or

manufacture approved repair person. Distributor does not have authorization to amend these statements. You

acknowledge and agree that any modification of the product for any purpose other than manufacturer

completed repairs is at your own risk. Before using this product, read the owner's manual completely and

familiarize yourself thoroughly with the product and the hazards associated with its improper use.

IMPORTANT: BEFORE FIRST USE on any Lift verify that a daily inspection has been completed and that all

components are in the proper working order.

This limited warranty gives you specific legal rights, and you also may have other rights, which vary from

state to state. Some states do not allow limitations or exclusions on implied warranties or incidental or

consequential damages, so the above limitations may not apply to You. This limited warranty is governed by

the laws of the State of California, without regard to rules pertaining to conflicts of law. The state courts

located in San Bernardino County, California shall have exclusive jurisdiction for any disputes relating to this

warranty.

Manufacturer reserves the rights to make design changes and or improvements to this product lines and

manual without notice. We at Torin have taken every effort to ensure complete and accurate instructions have

been included in this manual. However, possible product updates, revisions and or changes may have

occurred since this printing. Torin Inc. reserves the right to change specifications without incurring any

obligation for equipment previously or subsequently sold. Not responsible for typographical errors.

Alternately Customer Service can be reached through www.torin-usa.com or via email at

[email protected].

Not all equipment components are available for replacement, but are illustrated as a convenient reference of

location and position in the assembly sequence. Contact Customer Service for equivalent component. When

you contact us, please have your Product’s Model number, Serial Number and Description ready so that we

may help you efficiently. This information can be found on a sticker on the product.

For any warranty support or if your Torin® equipment is not functioning properly contact

Torin® Customer Service directly by telephone at 1-888-44-TORIN (1-888-448-6746)

8:00am – 5:00pm Pacific Time, Monday – Friday

www.torin-usa.com                                                                                                                      Made in China

Summary of Contents for T88007
































Reviews: