background image

2006 MASTIFF OWNER’S MANUAL

THANKS FROM BIG DOG MOTORCYCLES for your purchase. With that purchase comes a

commitment to provide you support for your handcrafted motorcycle. This Owner’s Manual

has been prepared to acquaint you with the care and maintenance of your motorcycle

while providing important safety information. Follow these instructions for maximum

motorcycle performance, personal motorcycling safety and pleasure.

This manual is designed to go with the motorcycle, should you decide to sell it, in order

to provide history and additional information to the next owner. The information in this

manual is based on the most current production information available at the time of

printing. Big Dog Motorcycles, L.L.C., reserves the right to make changes to their motorcycles

without notice or obligation.

THE FIRST 3,000 MILES ARE ESPECIALLY CRITICAL TO THE LONGEVITY AND

PERFORMANCE OF YOUR BIG DOG MOTORCYCLE. MAKE SURE YOU FOLLOW THE NEW

ENGINE BREAK-IN PROCEDURE OUTLINED ON PAGE 4 IN THIS MANUAL.

1

WARNING

!

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for Mastiff 2006





































































































Reviews: