21
Figure 20: Insert Hooks
6.
Press and hold the bottom right button and move joystick right to insert hooks into the bale
(Figure 20).
Figure 21: Lower Pickup
7.
Press and hold the top left button and move the joystick backwards to lower the pickup to its
home position (Figure 21).
8.
Repeat process from step 1 until Turntable is ‘full’
.
5.3.5 Auto Stack with Tie Operation
Before operating the auto stack function, ensure the following:
•
The pickup is in its home position.
•
The turntable is full and the bales are well aligned.
•
The side gates are open just past vertical, forks are raised (if being used) and rear clamps are
fully open.
Summary of Contents for Transtacker
