Big Backyard ORIANA A24656E, Installation And Operating Instructions Manual

Page: 32 / 40

Step 18: Attach Canopy to Fort
A:
Place Canopy over (OR11) Roof Ridge making sure bottom edges of tarp are even on both sides of assembly.
The sun on the tarp should face the front of the fort. (fig. 18.1)
B:
Secure one side by attaching Canopy to 1 (OR12) Tarp Front Back using 5 (S5) #8 x 1/2” Pan Screws (with #8
flat washer). (fig. 18.1 & 18.2)
C: Make sure the tarp is taut and then secure opposite end of Canopy to (OR12) Tarp Front Back on the opposite
side of the assembly using 5 (S5) #8 x 1/2” Pan Screws (with #8 flat washer). (fig. 18.1 & 18.2)
D:
Attach tarp to each end of (OR11) Roof Ridge using 2 (S5) #8 x 1/2” Pan Screws (with #8 flat washer). (fig.
18.1)
Fig. 18.1
Sun faces front
Fig. 18.2
OR12
OR11
Hardware
12 x # 8 x 1/2” Pan Screw (with #8 flat washer)
S5
S5
x 5
x 5
Canopy end is
halfway down
S5
OR12
S5
Other Parts
1 x Canopy
32