Big Backyard ORIANA A24656E, Installation And Operating Instructions Manual

Page: 28 / 40

A:
Attach 1 (F5) Cedar Wall to (F13) Post using 2 (S2) #8 x 1-1/2” Wood Screws and to (OR2) Front Divider
with 2 (S1) #8 x 1-1/8” Wood Screws. Make sure (F5) Cedar Wall is tight to floor boards and flush to edge of
(F13) Post. (fig. 15.1)
B:
21-1/2” above the floor boards attach 1 (F5) Cedar Wall to (F13) Post with 2 (S2) #8 x 1-1/2” Wood Screws,
Make sure (F5) is square and then attach to (OR2) Front Divider with 2 (S1) #8 x 1-1/8” Wood Screws. (fig.
15.1)
C:
Starting at (F13) Post, flush to outside edge of (F5) Cedar Wall and working towards (OR2) Front Divider,
attach 7 (F7) Wall Boards to both (F5) Cedar Walls using 4 (S0) #8 x 7/8” Truss Screws per board. Make sure
the bottom of the boards are tight against the floor boards and the bevelled edges to the top, facing out and
there are no gaps between boards. (fig. 15.2)
21-1/2”
Fig. 15.1
F5
S1
S0
F7
F5
x 4
S2
x 28
x 7
Keep boards tight to floor
Bevelled edge
faces out
F13
OR2
Fig. 15.2
OR2
F13
2 x Cedar Wall 1 x 4 x 23-1/2”
7 x Wall Board 1/2 x 4 x 20”
F5
Hardware
Wood Parts
28 x # 8 x 7/8” Truss Screw
4 x # 8 x 1-1/2” Wood Screw
4 x # 8 x 1-1/8” Wood Screw
F7
S2
S0
S1
F5
Step 15: Front Wall Assembly
If you purchased a Selwood Spiral Wave Slide refer to that manual.
28