17
settINg the operatINg temperature
1. To view the current set temperature, press
either the UP or DOWN ARROW button.
The set temperature will be displayed and
is indicated by a small point in the top
left hand corner of the display.
2. To
increase
the set temperature, press
and hold the UP ARROW button. The set
temperature will momentarily be
displayed and then the temperature
display will begin to increase. Continue to
press the UP ARROW button until the
new set temperature is reached then
release the button. To fine tune the
temperature settings, a single press of
the UP or DOWN ARROW keys will
increase or decrease the set temperature
by 0.1ºC.
3. To
decrease
the set temperature, press
and hold the DOWN ARROW button. The
set temperature will momentarily be
displayed and then the temperature
display will begin to decrease. Continue
to press the DOWN ARROW button until
the new set temperature is reached then
release the button. To fine tune the
temperature settings, a single press of
the UP or DOWN ARROW buttons will
increase or decrease the set temperature
by 0.1ºC.
4. Once the set temperature has been changed, the unit will heat or cool to the new set
temperature.
Note:
The ceramic beads will take some time to equilibrate to the set temperature; therefore it is
recommended that the unit is set up in advance to allow time for the required temperature to be
reached. To speed up cooling times, the bucket containing the ceramic beads may be stored in a
refrigerator prior to use.
Nº ICE
Set Point Indicator
Nº ICE
Nº ICE
Nº ICE
Nº ICE
Set Point Indicator
Nº ICE
New Set Point Indicator
Nº ICE
Nº ICE
Nº ICE
Nº ICE
New Set Point Indicator
Changing the set temperature will cause the
Set Point Indicator to move position while
this is being carried out.
