EN
14
OPERATING PRIMO +
1Power consumption: < 0.39 Watt
2
Power consumption in Standyby Mode: < 0.34 Watt
CAUTION
• Please make sure the lid (incl. Silicone seal and measuring cup) is on the mixing container before operation.
Connect your
primo
+
to a power socket with the correct electric specifications. You can find them on the rating plate
on the back of the device and in the chapter “Technical Data” on page 32. Make sure that the power plug is properly
inserted into the power socket.
Energy saving mode
1
If no mixing container is placed on the motor block, the motor block is in energy saving mode. The status- and opertaing
indicator flashes red.
Switching On
For the operation of your
primo
+
it is necessary to place the mixing container correctly on the motor block. Without the
attached mixing container you cannot be switched on for safety reasons. When switching on, a short acknowledgment
tone will occur and the status indicator will remain red. Depending on the mixing container used, the appropriate functions
are available.
Standby mode
Place the mixing container on the motor base. Now you can use your blender with 3 automatic programs, the manual mode
and pulse function. In standby mode, the oerpation and status indicator light up in red.
iPMS
The Speed is regulates by the iPMS automatically in stages 1-5. Engine perfomance is optimised when processing solid
ingredients, as well as in the preparation of Muses. This function is automatically active in the manual mode in addition to
the 3 automatic programs.
Summary of Contents for PRIMO+
Page 5: ...Beh lterabbildung hnlich...
Page 37: ...Illustration similar...
