19
MEASURING BEAKER, LID AND SEAL RING
SAFETY GUIDELINE FOR CLEANING
This chapter provides important tips for cleaning and maintenance and care of your high performance blender.
Please note the
following safety guidelines
before and during cleaning of your
primo
+
:
• Pull the power plug from the power socket before cleaning!
• Do not open the housing of the device under any circumstances.
• If live contacts are touched and the electrical system is charged, this can lead to an
electric shock or even death.
•
Never place the power plug in water for cleaning.
•
Never clean the power plug with a wet cloth.
•
Never touch the power plug with wet hands.
CAREFUL WHEN CLEANING
• The blades can cause injuries
• The mixing container does not belong in the dishwasher!
• If water has entered the motor block, disconnect the power plug immediately from the power socket.
Blade unit
The blade unit consists of the blade holder and the blades themselves. Both of these components are firmly connected to
each other and must only be disassembled by the bianco di puro customer service.
Release the blade unit by turning to the left from the mixing container. Use the supplied turning tool for this. To attach
the blade unit to the mixing container, turn it to the right. Us the turning tool for this as well, so the blade unit is properly
attached to the mixing container.
Measuring beaker
Place the measuring beaker (see fig. [1], page2) in the opening of the lid (
see fig.
[2], page 2) and twist it tight towards the
right. Turn the measuring beaker to the left to take it off, and lift it off the lid.
Lid with silicone seal
The lid closes the container opening with the silicone seal. You can remove the silicone seal from the lid for easy cleaning.
Press the lid hand-tight on the mixing container. Please take care that the silicone seal is placed in the lid after cleaning.
Only then the tightness of the lid is ensured.
Summary of Contents for PRIMO+
Page 5: ...Beh lterabbildung hnlich...
Page 37: ...Illustration similar...
