EN
19
CLEANING OF THE JAR (INCL. LID) AND MOTOR BASE
Cleaning of the jar and lid
• Clean the jar immediately after each use.
• The jar can be cleaned with a soft brush or dish cloth under running water.
• Do not use aggressive or abrasive cleaning agents or solvents.
• Clean the jar with a mild cleaning agent (detergent) or fill 2 cups of water into the jar, add some detergent, close the
lid (incl. measuring cup and seal ring) and press the Pulse button for some times.
• The silicone seal of the lid can be removed for easy cleaning. Before mixing make sure that the silicone seal is correctly
mounted again.
• When placing the jar onto the motor base, make sure that the contacts are completely dry.
•
Do not
set the jar upside down when drying. Always set the jar on the base.
Cleaning of the motor base
• Clean the motor base with a soft and damp cloth,
• Do not use any aggressive cleaning agents or solvents,
• Never immerse the motor base in water or other fluids (danger of short circuit),
• Never rinse the motor base under running water (danger of short circuit).
Should water or other liquids get into the engine block,
immediately unplug the power cord and contact customer service,
see chapter “Contact and Customer Service” on page 33.
Cleaning the tamper T42S
• Do not clean the display under running water or immerse the rammer in water or other liquids
• Use a lightly moistened cloth to clean..
• Do not clean the tamper in the dishwasher, otherwise the electronics will be damaged.
•
Caution when cleaning
• Always remove the power plug from the socket and from the engine block before cleaning.
• The stainless steel blade can cause injury!
• The jar is not suitable for the dishwasher!
