BIANCHI VENDING SIRIO FRESH BREW, Manual

Page: 24 / 45

24
SIRIO
If you are in SERVICE mode, firstly go to SELECTION mode and
then go into PROGRAMMING mode.
The main menu is composed of:
TIME-DOSES
PRICES
DISCOUNTS
PRICES -SELECTIONS
INCLUDE-SELECTIONS
INCLUDE-JUG
OPTIONS
COINS
SALES
TEMPERATURE
EURO OPTIONS
To exit from programming mode press “PROG” until one of the
above listed functions appears, then press the programming button
placed on the CPU board and return to the selection mode.
After machine setting, it is possible to memorize the data in a
portable programmer (FAGE P 3000), and use the same settings
for other machines of the same model.
The CPU and the programmer are connected by means of a flat
cable, check the position of the connector referring to the
topographic diagrams of the cards (Fig. 7.3).
Data is stored in the programmer until a new configuration reading
is carried out or when the programmer’s batteries run out.
l For the reading of the configuration press in sequence:
F
ð
1
ð
1
ð
F
ð
1
ð
F
l to update the machines’ memory:
F
ð
1
ð
2
ð
F
ð
1
ð
F
ð
1
ð
F
Connect and disconnect the programmer from the CPU board with
the distributor switched off.
Fig. 7.3
1 2
3
4
5
6
7
8
9
0
A
B
C
D
E
F
P 3000
FA.GE
7.2 Function description
7.2.1 TIME-DOSES (Fig. 7.4)
This menu gives access to the water and product powder dose
settings for each available drink.
Press ENTER once and the following appears on the display:
“01 Coffee key”
press ENTER again to start the dose setting operation for the first
selection:
“water 065”
to indicate the water dose.
With “+”, “-”, “digit” keys, the value of the water dose relative to
the espresso coffee selection no. 1 is changed.
Pressing ENTER again confirms the dose set and on the display
the subsequent setting appears if it is foreseen (in the case of
instant selections the powder product) or, in the contrary case,
the programme returns automatically to the starting point;
following appears on the display:
“01 coffee key”