19
SIRIO
6.6.2 Label application
- The labels indicating the product selections must be inserted in
the special slots according to the order indicated (Chapter 8.0
MAINTENANCE).
Carry out the operation as follows:
- Lift the cup columns spring band (Fig. 6.21).
- Remove the cup column (Fig. 6.22).
- Insert the labels in the order according to the selections used
on the vending machine (Fig. 6.23).
- Re-assemble the whole in inverse order.
6.6.3 Cup filling
Use only cups suitable for automatic vending machines, with a
diameter of over 70-74 mm, avoid compressing the cups between
themselves during loading.
Dont try to rotate the column manually.
First filling
In installation phase with the cup dispenser completely empty,
proceed as follows:
- Check that the cup column is not aligned with the distribution
outlet, then fill all the columns proceeding in an anti-clockwise
sense, opposite sense (when the column is aligned with the
distribution outlet), close the door and switch on the machine
so that the cup column rotates and automatically places itself
in a position in which it is not aligned with the inlet and then
proceed to fill (Fig. 6.24).
- Put the cup columns lid back on and snap in the spring band
(Fig. 6.25).
Normal filling
The cup column should normally filled with the machine off, simply
by opening the front door, lifting the turret securing bracket, lif-
ting the lid and inserting the missing cups.
Fig. 6.21
Fig. 6.22
Fig. 6.23
Fig. 6.24
Fig. 6.25
Summary of Contents for SIRIO FRESH BREW
Page 2: ......