BIANCHI VENDING SIRIO FRESH BREW, Manual

Page: 30 / 45

30
SIRIO
7.2.7 OPTIONS (Fig. 7.10)
This function renders available in sequence a series of options as
listed below; the ENTER key gives access to the submenus
visualising the first option. For each OPTION it is necessary to set
the logical status “Y” or “N” that either engages or disengages the
function.
Extra milk =enabling of the extra milk pre-selection key.
Cup sensor =
Motor delay = option to introduce a delay on the powder
product motors.
Elect. validator = coin slot- selector.
Permanent credit 1 = option for the choice of visualising the
credit until the same is finished (Y) (set the
multivend option to Y).
Contactless keys =option for the connection of FAGE NUOVA
BIANCHI contactless keys.
Executive = Executive coin mechanism (set Y also for
the electronic option).
Change giver =change giving option (with the COGES
systems - set Y).
BDV system =enabling for BDV coin mechanisms.
WARNING ! Should the BDV system not be
connected the distributor will not work and
the wording “PERMANENT DIAGNOSIS”
appears, in which case it is necessary to
repeat the entire programming operation by
means of P3000 (available with kit).
MDB-ICP system = enabling for MDB coin mechanism
(available with kit).
Master/Slave =possibility of controlling 2 dispenser with 1
token slot.
Fig. 7.9
7.2.6 INCLUDE JUG (Fig. 7.9)
The JUG function permits the consecutive dispensing of a selection
without cup for the number of times set (using the kit).
The INCLUDE JUG function makes it possible to activate the
required selections under the JUG function.
On pressing ENTER once, the following appears on the display:
“Selection 01 Jug = Y”
with the keys “+” and “-” the desired option is selected in the
same manner as the previous menu:
DIGITISING “ Y ” THE SELECTION IS INCLUDED.
The number of consecutive drinks dispensed for the JUG can be
set in the menu OPTIONS; JUG 1 is combined with selection 1;
JUG 2 is combined with all the other selections.