20
SIRIO
6.6.5 Payment system installation
The distributor is supplied without any payment system.
The installation of the payment system is the responsibility of the
installation technician.
Nuova Bianchi will not take responsibility for any eventual damage
to the machine itself and/or to things and/or persons due to
incorrect installation.
- Open the board and coin mechanism protection door (Fig. 6.27).
- Remove the support bracket from the machine (Fig. 6.28).
- Hook the coin mechanism on to the support brackets (Fig. 6.29).
- Fix the support with the two knobs.
- Connect the coin mechanism to the CPU board.
The selectors must be directly connected to the CPU board the
and the serial executive systems through the interface cable
supplied with the machine.
Then go into programming for the correct settings.
Consult chapter 7.0 PROGRAMMING so as to verify setting of
the parameters, that must be coherent with the system used.
Fig. 6.27
Fig. 6.28
Fig. 6.29
6.6.4 Insertion of waste dreg bag
- remove the coffee dreg chute from its slot;
- apply the bag securing clip to the chute;
- insert the plastic bag on to the chute and secure it with a clip
(Fig. 6.26);
- re-insert the chute into its slot.
Use plastic bags that are sufficiently long so that they touch the
bottom of the distributor.
Fig. 6.26
Summary of Contents for SIRIO FRESH BREW
Page 2: ......
