BIANCHI VENDING EP 4100 BIANCHI M, Use And Maintenance Manual

Page: 22 / 48

22
3.0 TECHNICAL SPECIFICATIONS
3.1 Machine dimensions and weights
2. DESCRIPTION OF THE MACHINES
The EP 4100 BIANCHI M coffee machine is been engineered and
constructed for the brewing of espresso coffee and other hot drinks.
Any other use is intended as improper or dangerous.
The manufacturer hereby declines each and every liability
for damages whatsoever arising to persons and/or things
due to improper, wrong or unreasonable use of any one of
the machines.
The machine operator must observe all the use and maintenance
instructions in this manual, at all times. Should any doubts on
operation or anomalies arise, stop the machine, do not attempt
repairs or direct interventions on the machine and immediately
contact the service facilities accordingly.
The EP 4100 BIANCHI M coffee machine is available either in
electronically controlled dispensing versions with programmable
cup dosage.
The dispensing group is heat set and stabilised to ensure optimised
utilization of all the noble coffee components. An electronic device
warrants for optimised hot water auto-levelling in the boiler unit.
Water and steam dispensing is provided via 3 spouts, 2 high-per-
formance multi-direction spouts that allow for the preparation of
cappuccinos and other hot drinks.
Said technical solutions ensure that energy wastes are preven-
ted thereby safeguarding the machine from dangerous thermal
shocks.
Water as necessary is tapped in directly from the water mains
and is pressurised via a sealed or maintenance free volumetric
pump. Water heating is provided via conductive thermal exchange
in the boiler unit.
By activating the appropriate controls located on the machine’s
frontlet panel, optimally pressurised and heated water is delivered
to the dispensers.
The machine is provided with a steel structural framework, onto
which all its mechanical and electric components are fi xed.
The machine bodywork is in stainless steel and Baydur to gua-
rantee optimised protection and safety combined with unique
designing.
DIMENSIONS AND WEIGHTS
Length [mm] 560
Depth [mm] 480
Height [mm] 467
Weight [kg] 30
Boiler capacity [litres] 2
PACKING
Volume [cm
3
] 224000
Dimensions LxDxH [mm] 640x500x700
Gross Weight [kg] 7.5
Power supply
voltage
230V
Power supply frequency 50Hz/60Hz
Power input 2,3 kW
Steam boiler rated pressure 110 Kpa
Heat exchanger rated pressure 1200 Kpa
1 dose fi lter basket N°2
steam wand N°2
Instruction manual N°1
Wiring diagrams N°1
3.2 Items on issue with the machine
467
408
560
Fig. 3.1