
29
MENU 16 (PREVENTIVE ACTION)
Water treatment unit
Water treatment unit decounter
00000
Decremented at every dispensing
cycle requiring the supply of water.
Entry data allowed: 0-65535
Boiler
Boiler decounter. Decremented at every
00000
dispensing cycle requiring the supply
of water.
Entry data allowed: 0-65535
HACCP Sanitization
HACCP sanitization de-counter
00000
Decremented at every dispensing cycle
requiring the supply of water.
Entry data allowed: 0-65535
Electro valves
Electro valves decounter Decremented
00000
at every dispensing cycle requiring the
supply of water.
Entry data allowed: 0-65535
Seals
Seals decounter Decremented every
00000
time the group is closed.
Entry data allowed: 0-65535
Coffee grinders
Coffee grinders decounter.
00000
Decremented every time the grinder is
activated.
Entry data allowed: 0-65535
Coffee filters
Coffee filters decounter.
00000
Decremented at every coffee dispensing
cycle. Entry data allowed: 0-65535
Coffee grounds reload
Coffee grounds reload value.
050
Entry data allowed: 0-255
Coffee grounds
Coffee grounds decounter.
000
Decremented at every coffee dispensing
cycle. Entry data allowed: 0-255
MENU 17 (DECOUNTERS)
Decounters
The sub menus available for selection are as
General param.
follows:
1. General parameters (“General param. “)
2. Decounter value
(“ Decount. Val. “)
3. Reserve
(“ Reserve “)
4. Reload
(“ Reload “)
MENU 17.1 (GENERAL PARAMETERS)
Enab. Decounters Enables decounter management.
No
Entry data allowed: No or Yes.
Enable reset
Enables reset.
No
Entry data allowed: No or Yes.
Enable chip card Enables chip card
No
Entry data allowed: No or Yes.
MENU 17.2 (DECOUNTER VALUES)
Powder x decnt.
Instant powder × decounter value, where ×=1
00000
- max. number of instant powders.
Entry data allowed: 0-65535
Decount. Beans
Beans decounter value.
00000
Entry data allowed: 0-65535
Decount. Cups
Cups decounter value.
00000
Entry data allowed: 0-65535
Sect. A×× decount. Vega sector xx decounter value
00000
with xx=1-max. number of sectors.
Entry data allowed: 0-65535
MENU 17.3 (RESERVE)
Enab.Powd.Res.
Enables instant powder decounter reserve
No
management.
Entry data allowed: No or Yes.
Enab.BeansRes.
Enables beans decounter reserve
No
management.
Entry data allowed: No or Yes.
Enab.CupRes.
Enables cup decounter reserve management.
No
Entry data allowed: No or Yes.
Enab.Sect.Res.
Enables sectors decounter reserve
No
management.
for Vega. Entry data allowed: No or Yes.
Powders Reserv. × Instant powders x decounter reserve value
00000
with x=1-max. number of instant powders.
Entry data allowed: 0-65535
Beans reserve
Beans decounter reserve value.
00000
Entry data allowed: 0-65535
CupsReserve
Cups decounter reserve value.
00000
Entry data allowed: 0-65535
Sect. A×× reserve Vega sector xx decounter reserve value
00000
with xx=1-max. number of sectors.
Entry data allowed: 0-65535
MENU 17.4 (RECHARGE)
Enab.Powd.Rech. Enables instant powder decounter recharge
No
management.
Entry data allowed: No or Yes.
Enab.BeansRech. Enables beans decounter recharge
No
management.
Entry data allowed: No or Yes.
Enab.CupsRech.
Enables cups decounter recharge
No
management.
Entry data allowed: No or Yes.
Enab.Sect.Rech.
Enables sectors decounter recharge
No
management for Vega. Entry data allowed:
No or Yes.
Powd. Recharge × Instant powders x decounter recharge value
00000
with x=1-max. number of instant powders.
Entry data allowed: 0-65535
Beans recharge
Beans decounter recharge value.
00000
Entry data allowed: 0-65535
Cup Recharge
Cups decounter recharge value.
00000
Entry data allowed: 0-65535
Sect.A××Recharge Vega sector xx decounter recharge value
00000
with xx=1-max. number of sectors.
Entry data allowed: 0-65535
MENU 18 (CLOCK)
Clock
The sub menus available for selection are as
Set hours/minutes follows:
1. Sets hours and minutes
(“Set hour/minutes“)
Visible only if the clock chip is provided.
2. Date (“ Date “)
Visible only if the clock chip is provided.
3. Switch ON-switch OFF (“Switch on“)
4. Wash cycles (“ Wash cycles “)