22
Fig. 6.17
Fig. 6.18
Fig. 6.19
– remove all the powder chutes, water funnels, mixing bowls
and whippers and silicone tubes and dip these parts also in
the prepared solution
(Fig.6.17)
– with a cloth soaked with the solution clean the whipper assembly
base
(Fig.6.18)
– the parts must soak in the solution for the time indicated on
the solutions’ instruction label.
– Recover all the parts, rinse them abundantly, dry them perfectly
and proceed with the re-assembly in the distributor.
After re-positioning the container undertake to raise the
flap in order to reset the correct function (fig. 6.19).
For further safety after the assembly of the parts, effect
some automatic cleaning cycles so as to eliminate any
eventual residues.