background image

Equipment list

Below is the list of Biamp Vocia equipment used in this project:

• 5 - Vocia

DS-4

• 2 - Vocia

DS-10

• 2 - Vocia

EWS-10

• 2 -

VA-8150CV

• 2 -

VA-4300CV

• 1 -

VA-8600

• 4 - WR-1

• 1 - VI-6

• 3 - ANC-1

• 1 - LSI-16e

• 1 - CI-1

• 1 - MS-1e

• 8 - PLD-1*

• 23 - PLD-2*

4-button desktop paging station, cardioid microphone, PoE, CobraNet audio/control

10-button desktop paging station, cardioid microphone, PoE, CobraNet audio/control

10-button emergency wall-mount paging station, cardioid microphone, PoE, CobraNet audio/control

8-channel x 150W constant voltage 70V/100V amplifier, CobraNet audio/control

4-channel x 300W constant voltage 70V/100V amplifier, CobraNet audio/control

8-channel x 600W (2400W Total) constant voltage 70V/100V amplifier, CobraNet audio/control

Wall remote for background music source selection and volume control

6-channel networked audio input expansion device, 4 line-level inputs, 2 mic/line inputs with
phantom power, PoE, CobraNet audio/control

Provides automatic output level adjustments in response to changes in ambient noise levels, PoE,
CobraNet audio/control

Enhanced emergency interface between the Vocia paging system and the emergency/fire alarm
systems

Control interface for LSI-16e

Message Processor for recorded announcements & scheduling

Speaker line monitoring device for Vocia Amplifiers (VA-8600)

Speaker line monitoring device for Vocia Amplifiers (VA-8150CV and VA-4300CV)

*Optional - Active and passive speaker line monitoring devices are available in the Vocia product line and may be
required for VACIE and evacuation compliance. Biamp recommends speaker line monitoring be used with all life-safety
and emergency systems however these units are not shown or included in the system diagram above. Please check
with authorities if speaker line monitoring is required in the local jurisdiction.

Note that other non-Biamp equipment is required in addition to this list, including the loudspeakers, ambient sensing
microphones, media sources, and CobraNet PoE network switches.

Vocia configuration file

A complete Vocia configuration file is available for download here:

Copyright 2013-2020 Biamp Systems

http://support.biamp.com/

2

Summary of Contents for Vocia ANC-1









Reviews: