BH FITNESS XS8 -, User Manual

Page: 10 / 19

Tool:
9. Assemble Rear Foot Bar Cover
1) Use Screwdriver to remove two Self Tapping Screws (57) at the back of the Left Foot Bar (9).
2) Place the Rear Foot Bar Cover (39) around the Left U Shape Brackets (8). Tighten it with two Self Tapping
Screws (57) by using Screwdriver.
3) Do the same assemble steps for the right side.
10. Adaptor Installation.
Plug one end of the Adaptor (87) into the power jack of the DC Cable (14) on the back of the Chain Cover.
Before plugging in, make sure to check carefully the specifications on the Adaptor. Plug the other end of the
Adaptor (87) into the electrical wall outlet.
ASSEMBLY
Screwdriver
- 8 -