28
13. OTHER AREAS OF POSSIBLE RISKS
13.1 Mechanical dangers
All moving parts on the machine (hammers, knives and V-belts) are
protected by permanent safety guards minimising risks and dangers re-
lated to moving parts on the machine. No accidental removal of the gu-
ards will be possible, as special tools will be required to dismount them.
WARNING:
operating the shredder without the safeties will increase
your risk of getting injured while operating the machine.
13.2 Electric dangers
All machine parts staying under voltage are duly insulated or sealed
inside a fixed casing to avoid accidental contact. For safety reasons all
fixed casings can be only removed using special tools and equipment.
WARNING:
removing a fixed protection casing when the machine is
running or without having priory cut the power off, may result into
major danger of electrical shock!
14. CONSUMABLES
Here below is a list of the most frequent sparest required for this ma-
chine at normal operating conditions:
Cutting knives
Code No. 18941
Rotor hammer
Code No. 18942
Hammer shaft
Code No. 18938
Counter-knife of the side spout
Code No. 19054
Hopper rubber lining
Code No. 18937
V-belt
Code No. 53847
When placing an order for spare parts please always show the respec-
tive part number on one side of each quantity.
Purchase orders can
be submitted both in writing and on the phone to your dealer.
