BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 9394
Engine Timing Tool Set
for Opel, Vauxhall, Saab, Chevrolet
TOOLS
1
Crankshaft pulley alignment tool, to be used as OEM EN-48585
2
Flywheel holding tool, to be used as OEM EN-43653 / J43653
3
Tensioner retaining pin 2.5 mm, to be used as OEM EN-955-10 / KM 955
4
Tensioner locating pin 4.0 mm, to be used as OEM EN-955-20 / KM 955-20
5
Tension plunger resetting tool, to be used as OEM EN-45027-1 / J-45027-1
6
Tension plunger holder, to be used as OEM J45027-2 / EN45027-2 / EN-45027
7
Camshaft locking tool left hand, to be used as OEM EN-49212 / EN-49212-1
8
Camshaft locking tool right hand, to be used as OEM EN-49212 / EN-49212-2
9
Camshaft adjuster holding tool, to be used as OEM EN-48953
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This timing tool set is specifically designed for the high power output 2.0 L and 2.4 L twin cam turbo
charged petrol engines found across the GM, Chevrolet and Saab ranges. The set provides all the
tools required to set and hold the camshaft, the crankshaft and the chain tensioner tools when
performing major engine work or replacing the cam chain and associated tool.
VEHICLE LIST
Manufacturer
Model
Type
2.0 L
2.4 L
Opel / Vauxhall
Astra
OPC
OPC/VXR
Turbo
E85
Turbo T-Bi Power
LHU / A20NFT
LTG / A20NHT
LDK / A20NHT
A24XE
A24XF
LE5
LE9
Insignia
Antara
Chevrolet
Captiva
HHR
Malibu
Saab
9-5
