BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
USE
Position the reset tool (BGS 8283) on the clutch.
Attention: both reset hooks (A) of the tool must
engage in the recesses of the clutch.
Slightly loosen knurled screws (B), press both handles
(C) together and tighten the knurled screws (B) again.
Position the pre-tensioning tool (BGS 8284) on the
clutch.
Tighten the spindle adapter (E) clockwise by hand.
Turn spindle (D) clockwise until the diaphragm spring
is pre-tensioned towards the stop.
Slightly loosen the knurled screws (B) of reset tool
(BGS 8483), press the handles (C) of the reset tool
together to the stop, hold tight and tighten the knurled
screws (B) again.
Adjustment ring of the SAC clutch is now secured in its
position.
ENVIRONMENTAL PROTECTION
Dispose of this product at the end of its working life environmentally. Recycle
unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment. Contact your local solid waste authority for
recycling information.
