BFI Automation CFC 2000, Original Operating Instructions

Page: 15 / 56

Safety
2-3
2.3 Safety instructions
The following instructions on accident prevention have to
be observed when operating the compact flame controller.
Only operate the device if it is in a proper state !
•
Do not remove or disable safety devices.
•
Check for externally noticeable damage and defects
prior to using the device ! Immediately notify the ap-
propriate authority/person of any changes that occur
(including changes in operating performance). If nec-
essary, stop and secure the device immediately.
•
Allow only authorised specialist staff to carry out set-up
and/or maintenance work.
•
Replace worn or defective parts.
•
Use suitable maintenance tools only.
•
After repair work, refit all safety devices and carry out
electrical and mechanical checks.
•
Check the operating instructions for details of displays
as well as switch-on and switch-off procedures.
•
Prior to switching on the device, make sure that no-one
can be endangered by the device !
•
The operating company is responsible for ensuring that
the device is only operated in a proper state and that
account is taken of all the appropriate safety require-
ments and provisions.
•
The operating instructions always have to be kept
close to the device and be readily at hand.
•
Any non-compliance with the safety instructions out-
lined in these operating instructions may lead to dam-
age to property, personal injury or even death.