BFI Automation 5012 SD, Original Operating Instructions

Page: 37 / 48

Description
5-7
synch can be done immediately by activating “Read” but-
ton, followed by “Synch” button. The whole time synch
process will take a few minutes. After successful synchro-
nization,the LED is green next to the date/time window.
This synchronization must be carried out again after tak-
ing off the converter from power supply.
5.5.2
Data recording to SD-Card
The recording starts immediately after plug-in of the SD-
Card into the slot. Don’t remove SD-Card when Status
LED SD is ON.
5.5.3 Single Mode
In this mode the software CFC NET communicates with
the selected converter box 6012 only.
Select the converter box 6012 you wish to display here.
The selection is made via the drop down menus"Selection
converter box" and "Unit Selection".
Amplitude, frequency,
DC-raw signal and cur-
rentsource, as well as
the status of the relay
Settings
at thecon-
verter Parameter
of the CFC
4000