BFI Automation 5012 SD, Original Operating Instructions

Page: 35 / 48

Description
5-5
5.4.5 BUS addressing
Addressing the Converter Box 6012 is made up of the set-
ting of the DIP switches 5 and 4, and the address rotary
switch. With the address rotary switch 16 addresses can
be selected. The additional DIP switches 5 and 4, the ad-
dress selection is extended to 4 banks. Thus, a total num-
ber of 64 gives addresses. The software CFC-NET pro-
vides each bank as a "Bank" is.
5.4.5.1 Adr . 5
DIP switch 5 sets the highest Bit of the address to “ON”.
See BUS addressing 5.4.7!
5.4.5.2 Adr. 4
DIP switch 6 sets the second highest Bit of the address to
“ON”.
See BUS addressing 5.4.7!
5.4.5.3 Address rotary switch
The 6012 can be set to a bus address between 0 and 63.
With the address rotary switches only addresses can be
set between 0 and 15, are therefore in the DIP switch, two
switches (DIP switches 5 and 6) that extends the address-
able range from 0 to 63.
The address ranges are adjusted according to the follow-
ing table: