BFI Automation 5012 SD, Original Operating Instructions

Page: 16 / 48

Safety
2-4
2.4 Safety devices
2.4.1 Fundamental aspects
Check the safety equipment and locking devices on the
device for safe operational condition.
Only operate the device if all safety devices are present
and enabled. The operating company or operator of the
compact flame controller is responsible for the proper op-
eration of the device.
The device has been fitted with warning and danger signs
for the protection of operating staff. These signs have to
be observed. Damaged or illegible signs have to be re-
placed immediately.
2.4.2 Safety devices on the compact flame control-
ler
The converter module 6012 is equipped with the following
safety devices:

IP50 housing (protection against accidental contact)

Fuse for powerinput

Fuse for relay output contacts

Wire break detection of the flame relay lines of the
CFC 4000

Optional IP66-protection for variance in plastic housing