BFI Automation 5012 SD, Original Operating Instructions

Page: 21 / 48

Technical data
3-1
3 Technical data
3.1 General characteristic features

Relay loadable with max. 250VAC/1A / 300VA

Current output of the CFC 4000 looped (amplitude)

Additional current output in dependence of the flame
modulation frequency, end frequency adjustable in 16
steps

Additional current outputin dependence of the DC-sig-
nal

Both additional mA outputs adjustable to 0/4 to20mA

Fused loop of the 24 V DC power supply of the CFC
4000

Converts RS232 signals of CFC4000 into RS485 sig-
nals for longer distances (max. 1.200 m).

Network of up to 64 flame monitoring systems with
CFC NET software for operator in control room.

Freely allocatable bus addresses between 0 and 63

Inbuilt BUS termination resistor

Supply voltage selectable between 24 V DC and100-
240 V AC

Long-term data storage on SD card

DIN rail or wall mounting
3.2 Factory settings of the converter 6012
The converter is delivered with the following settings:
Initial value current outputs: 4 mA (DIP 1 = ON)
Current Relay Function (CRF): Off (DIP 2 = OFF)
Sensitivity change-over: Off (DIP 3 = OFF)
BUS termination: Off (DIP 4 = OFF)
Address: 0 (DIP 5/6 = OFF and address switch = 0)
Frequency switch: 60 HZ