BFI Automation 5012 SD, Original Operating Instructions

Page: 18 / 48

Safety
2-6
2.5.2 Electrical / electronic devices
Danger to life caused by electrical current!
Contact with live wires or components presents a danger
to life !
Before working on electrical components, disconnect the
compact flame controller from the mains power supply!
In keeping with the electrical regulations, work on electri-
cal / electronic parts / components may only be carried
out by electrical specialists.
Important rules of conduct

Check the device in regular intervals. Any defects or
faults ascertained have to be corrected immediately.
Switch off the machine until the defects have been cor-
rected.

System components, on which inspection, mainte-
nance and repair work to be carried out, must - if re-
quired - be switched off. First check the de-energized
parts for voltage and adjacent, live parts isolate!

If work is required on live parts, a second person has
to be assigned who can disconnect the power supply in
case of an emergency. Only use insulated tools !

Fuses must not be repaired or bypassed. Only original
fuses with the specified current use!